Z-PASS2-S

Available product versions: Z-PASS2-S-4GWW

 

EC 61131 Controller, Straton IDE, VPN router, integrated I/Os, GPS receiver, LTE 4G modem
Z-PASS2-S (latest hw rev. Z-PASS2-S-4GWW) is an IEC 61131 Advanced Control Unit that natively supports the SENECA LET’S (Remote control and remote assistance platform for Industry 4.0). This powerful CPU provides maximum reliability and security for data management and monitoring by combining PLC (IDE Straton) functionality with routing and remote access capabilities, supporting Point-To-Point connections for remote assistance or Single LAN connections for remote control (for more information www.seneca.it/lets).

The latest hw rev. Z-PASS2-S-4GWW further improves CPU performance by integrating 6 I/O channels (1DI for remote connection security interlock, 1DO for the on-going VPN connection signalling and 4 other configurable digital channels), a GPS receiver and a new 4G LTE modem with support of Worldwide bands.

Z-PASS2-S is equipped with 2 Ethernet ports configurable in SWITCH or LAN/WAN operating mode, 3 serial ports and 1 USB port. This CPU supports ModBUS TCP server, ModBUS RTU master/slave, FTP/SFTP server, HTTP/HTPPS server protocols, OpenVPN encryption and optional protocols for Energy Management applications such as IEC 60870-101, IEC 60870-104 and IEC 61850. The device integrates an ARM9 32-bit, 1Gb Flash, 64MB RAM CPU and a memory expansion slot with microSD. Configuration is done via Z-NET4 environment and web server.

Description

TECHNICAL DATA

CODE: Z-PASS2-S-4GWW
DESCRIPTION: IEC 61131 Controller, Straton IDE, VPN router with integrated I/O, GPS system and LTE 4G WW modem
POWER SUPPLY: 11..40 Vdc; 19..28 Vac
POWER CONSUMPTION: Typical 4 W @ 24Vac, Max 6 W
INSULATION: 1.500 Vac
STATUS INDICATORS: Increasing/Ready to use
Input/output status
Remote Connection (RCD)
VPN Connection (VPN)
LAN/WAN (Ethernet LAN/WAN mode)
SERV (VPN BOX Service)
Rx-Tx Communications
OPERATING MODES: Bridge
Gateway
Router ETH/4G (redundant connection)
Remote Virtual COM
Tunnel P2P/P2MP/TCP/UDP
VPN
BANDS SUPPORTED 4G LTE LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
LTE-TDD: B38/B39/B40/B41
WCDMA: B1/B2/B4/B5/B6/B8/B19
GSM: B2/B3/B5/B
(for more information please see user manual)
Modem certifications: Deutsche Telekom (Europe) Verizon*/AT&T*/T-Mobile*/Sprint* (North America)
I/O CHANNELS nr. 1 DI for VPN Connection Enabled
nr. 1 DI for general use
nr. 1 DO for VPN connection in progress
nr. 1 DO for general use
nr. 2 DI/DO configurable
ETHERNET PORTS: nr. 2 10/100Tx on RJ45 front panel
SERIAL PORTS: nr. 1 RS232/485 switchable via webserver, baud rate max 115k on connector
nr. 1 RS485, baud rate max. 115k on IDC10 connector for bus and terminals
nr. 1 RS485, baud rate max. 115k on terminals
SUPPORTED PROTOCOLS: FTP server, SFTP server
HTTP server, HTTPS server
SMTP / SMTPS client
SNMP
SAMBA (MS Windows)
SIEMENS S7 Client
MQTT Client
OPC-UA Server / Client
Modbus RTU Master/Slave
Modbus TCP Server/Client
M-BUS master (via optional module Z-MBUS)
IEC 60870-101 slave (opt.)
IEC 60870-104 server (opt.)
IEC 61850 server/client (opt.)
VPN SUPPORT VPN Box
OpenVPN
GPS RECEIVER: GNSS: GPS/GLONASS/BeiDou/Galileo/QZSS up to 55 channels
USB PORT: nr. 1 USB host 2.0 type A on side connector
OPERATING TEMPERATURE: -20°C..+65°C
DIMENSION WXHXD: 52,5x100x112 mm