SIGNAL CONDITIONERS | ISOLATORS | CONVERTORS
K-Line converters are signal conditioners featured by 3-way digital technology isolation with 1.5 kVAC, precision class 0.1%, power supply range from 19.2 up to 30 VDC, compact size (only 6,2 mm width), low power consumption and MTBF of over 500.000 hours. The power supply technique is either standard type (on spring clamps) or with distributed system, based on K-BUS expandable connector.
Z Series modules are reliable signal conditioners, easy use and installation oriented. These devices are available in more power standards and meet the most common interface and conditioning needs. Most models feature galvanic 3-way isolation of 1.5 kVac and compact size (17.5 mm standard width).
Z109UI2-1
DC current / voltage converter
Z170REG-1
DC duplicator / isolator with universal input and 2 output
Z109S
DC current isolator
Z-SG2
Strain gauge input module with advanced features
Z109REG2-1
High performance universal converter
K109S ( Slim 6.2 mm )
V / I converter with power for 2 wire transducers
K109UI ( Slim 6.2 mm )
Galvanic isolator analog converter
K109LV ( Slim 6.2 mm )
Current shunt / V-I converter
K121 ( Slim 6.2 mm )
Loop powered isolator / universal converter (mA, V, Ohm, RTD, TC) – ATEX Certified
K109TC ( Slim 6.2 mm )
Thermocouple converter
T201
Loop-powered AC current transducer
T201DC
DC loop powered 4..20 mA current transducer
T201DCH
AC/DC contactless TRMS current transducer
T201DCH100
AC/DC contactless TRMS current (± 100 A) transducer, Hall Effect with 0..10 V AO
T201DCH300-LP
AC/DC contactless TRMS current (± 300 A) transducer, Hall Effect with 4..20 mA AO
T201DCH50-LP
AC/DC contactless TRMS AC/DC transducer with 4..20 mA output
T201DC100
Passive current transducer 100 Adc for 4..20 mA current loop
T201DCH300
AC/DC contactless TRMS current (± 300 A) transducer, Hall Effect
T201DCH50-M
AC/DC contactless TRMS current (± 50 A) transducer, Hall Effect with 0..10 V AO and ModBUS interface
T201DCH100-M
AC/DC contactless TRMS current (± 100 A) transducer, Hall Effect with 0..10 V AO and ModBUS interface
T201DCH300-M
AC/DC contactless TRMS current (± 300 A) transducer, Hall Effect with 0..10 V AO and ModBUS interface
T201DCH50-MU
AC/DC contactless TRMS current (± 50 A) transducer, Hall Effect with 0..10 V AO/alarm output and ModBUS interface
T201DCH100-MU
AC/DC contactless TRMS current (± 100 A) transducer, Hall Effect with 0..10 V AO/alarm output and ModBUS interface
T201DCH300-MU
AC/DC contactless TRMS current (± 300 A) transducer, Hall Effect with 0..10 V AO/alarm output and ModBUS interface
T201DCH600-MU
AC/DC contactless TRMS current (± 600 A) transducer, Hall Effect with 0..10 V AO/alarm output and ModBUS interface
DATA ACQUISITION | REMOTE I/O | MODBUS | ETHERNET | CANOpen
Data Acquisition & Automation Systems product line includes I/O ModBUS, CANopen, Ethernet, LED and OLED HMI technology, IEC 61131 logic controllers for Energy Management, IEC 60870-5-101, IEC 60870-5 -104, IEC 61850 process controllers and flow computers. Our I/O systems are modular and open automation platforms suitable for both single and thousands I/O signals management. They include the widest variety of I/O modules: digital inputs, high-speed counters, relay digital outputs and MOSFET, analog channels (mA, V, Ohm, mV), strain gauges, RTDs, thermocouples, measures of a power grid. Our systems are designed to help systems integrators, engineering/design firms, instrumentation manufacturers, electricians, qualified installers.
Z-8AI
8-CH analog input module / RS485
Z-8AI
8-CH analog input module / RS485
Z-4AI
4-CH analog input module / RS485
Z-3AO
3-CH analog output module / RS485
Z-4RTD2
4-CH RTD input module / RS485
Z-4TC
4-CH thermocouple input module / RS485
Z-8TC1
CH-8 thermocouple input module / RS485
ZE-2AI
2 CH Analogue input Modbus RTU – Modbus TCP-IP module
Z-D-IN
5-CH Digital input module / RS485
Z-D-OUT
5-CH Digital output module / RS485 with a micro USB port on the front panel
Z-5DI-2DO
Multifunction digital module with 5 inputs, 2 outputs and RS485 interface
Z-10-D-IN
10-CH Digital Input (32 bit @2.5 kHz) module / RS485
Z-10-D-OUT
10-CH digital output module / RS485
ZC-24-DI
24 CH digital input CANopen / ModBUS RS485
ZC-24-DO
24 CH digital output CANopen / ModBUS RS485
ZC-16DI-8DO
16 CH digital input – 8 CH digital output CANopen / ModBUS RS485
R-8AI-8DIDO
Ethernet module 8 analog input and 8 digital input/output channels
ZE-4DI-2AI-2DO
4 CH Digital Input/ 2 CH Analogue Input, 2 CH Digital Output Modbus RTU-Modbus TCP-IP
ZC-8AI
8 CH analog input (mA, V) CANopen module
ZC-3AO
3 CH analog output (mA, V) CANopen module
ZC-4RTD
4 Ch RTD (Pt100, Ni100, Pt500, Pt1000) input CANopen module
ZC-8TC
8 CH Thermocouple (J,K,E,N,S,R,B,T) CANopen module
ZC-SG
1 CH strain gauge CANopen module
Data Logger
Z-LTE
4G LTE WW Datalogger with GPS, built-in and expandable I/Os, logic functions, remote control, and alarm management.
FIELDLOGGER
FieldLogger is a versatile, powerful, and yet cost-effective data logger handling analog, digital, and other types of variables with high resolution and speed. It is a high performance and high connectivity equipment and yet easy to configure and operate.
Industrial Communication
Industrial Communication & Remote Control product line includes industrial modems and gateways, VPN routers, radios UHF/VHF, serial communications interfaces and fiber optics, remote control units, remote alarm, and assistance units. Our products for industrial communication support leading network protocols HTTP, FTP, SMTP, TCP-IP, MQTT and technologies like 3G+, 4G, LTE and web servers.
Communication equipment allows the extension of scalable networks and allows data communication between different levels of IT and industrial network architecture. Networking and remote monitoring solutions offer openness, scalability, and maximum connectivity in the transmission of data from and to supervision centers.
Z-KEY-WIFI
2-port ModBUS industrial gateway / serial device server with Wi-Fi module
R-PASS
IIoT Gateway/Router with built-in I/Os, datalogger, remote control functions, and VPN
R-KEY-LT
1-port ModBUS-RTU/ASCII industrial gateway
Z-KEY
4 Ch RTD (Pt100, Ni100, Pt500, Pt1000) input CANopen module
R-KEY-LT-P
Profinet IO <-> ModBUS RTU / TCP-IP compact gateway
Z-KEY-P
Profinet IO <-> ModBUS RTU / TCP-IP gateway/protocol converter
R-KEY-MBUS
1-port M-BUS <-> ModBUS RTU/TCP-IP protocol Converter
Z-KEY-MBUS
2-port M-BUS <-> ModBUS RTU/TCP-IP gateway/protocol converter
Serial / USB Converters
The range of serial converters allows the management of RS232, TTL, RS485, USB serial interfaces to and from PC, PLC, control systems and I/O modules, supporting master, slave and fieldbus devices (ModBUS RTU, M-BUS). The serial converters, designed for industrial use and harsh environments, are available in portable or panel mount versions and also serve as signal isolators, adapters and configuration tools for programmable instruments. Their purpose is to convert and transfer data packets between different networks and serial devices or to connect serial interface peripherals directly to a USB port on a PC. The communication mode can be full-duplex (simultaneous bidirectional transmission) or half-duplex when data transmission and reception between devices cannot take place simultaneously because the data line is unique. Serial communication can be asynchronous and synchronous. In asynchronous mode, transmission and reception are non-synchronous. In synchronous communication, transmission and reception are synchronized by a system clock.
S117P1
Portable serial converter USB/RS232, USB/RS485, USB/TTL UART
Z107
RS232 – RS485/422 serial converter for DIN rail installation
K107USB ( Slim 6.2 mm )
RS485/USB asyncronous serial converter
S107USB
RS485/USB optoisolated serial converter, portable version
S107P
RS232 – RS485/422 serial converter, portable version with Half / Full duplex communication
Z-MBUS
RS232/M-BUS, USB/M-BUS adapter module for SENECA or third-party CPUs
K107A ( Slim 6.2 mm )
RS485/RS485 serial repeater
K107B ( Slim 6.2 mm )
RS232/RS485 serial converter
IOT & IIOT
Z-LTE
4G LTE WW Datalogger with GPS, built-in and expandable I/Os, logic functions, remote control, and alarm management.
R-PASS
IIoT Gateway/Router with built-in I/Os, datalogger, remote control functions, and VPN
MyALARM3 Cloud
The smart control and monitoring solution for installations, applications and unattended sites
Z-PASS1
IIoT Edge Gateway with VPN support, Serial Device Server with embedded I/O’s
Z-PASS2
IIoT Edge Gateway with VPN support, integrated I/O, GPS receiver, and 4G LTE WW modem
Digital Indicator | Totalizer
The S Series digital indicators are reliable, high brightness, high precision devices. Equipped with scalable displays with 4, 6, 8, 4+7 digits, the S Series digital indicators manage universal analog, digital and temperature sensor inputs with signal retransmission on analog output and optional ModBUS interface and relay alarm activation.
S401-L
ModBUS RTU indicator with OLED 2,7″ display
N1500-LC
Load Cell Panel Meter
The N1500-LC load cell panel meter is the ideal instrument for monitoring analogue variables in industrial processes with Load Cells.
S311A
Universal analog input indicator – totalizer
S311AK
4 digit display with I/V analog input, high accuracy class
S311AK-IP66
4 digit display with I/V analog input, IP66 case
S311D
Frequency / digital input indicator – totalizer
S312A
4-Digits display with analog input and 4 relay outputs
S315
4 digit loop powered display with 4-20 mA input signal
S315-IP66
4 digit loop powered display with 4-20 mA input signal and IP66 case
LOOP CONTROLLERS | PROCESS CONTROLLERS | TEMPERATURE CONTROLLERS
NOVUS has been developing a wide range of industrial controllers for almost 4 decades, making sure your processes benefit from the most advanced technology while keeping unique stability and performance. Our controllers stand out as the easiest to install and configure in the market.
N20K48
Global innovation product from NOVUS, we proudly release our N20K48 controller family. Its new and consistent concept is based on a compact, powerful core controller plus a growing family of micromodules that enables it to meet a wide range of application requirements in the industry.
N1050
N1050 is an advanced high performance PID temperature controller featuring a vivid LCD display in a modern design package. It combines the proven robustness of NOVUS PID algorithm with a large and bright easy-to-read multicolor 11-segment LCD display with alphanumeric mnemonics and crystal clear status signaling.
N1200
Auto-Adaptive PID Controller
The N1200 process controller was designed for high performance control in the most demanding applications. Its advanced and consolidated Auto-Adaptive PID algorithm ensures fast and highly accurate response in very dynamic processes with complex profiles.
N1030
Temperature Controller
N1030 is a temperature controller that features a high performance PID algorithm in a compact housing, with only 35 mm depth.
Its compact construction and the convenient detachable connector provide an easy set up on short profile panels, optimizing the space and reducing costs. It has two outputs always available which can be configured both as a control or an alarm.
N1040
Temperature Controller
The microprocessor based N1040 was conceived for low cost applications and yet achieving high degree of accuracy. It features a short depth enclosure of only 70 mm thus reducing panel space considerably. Another important innovation is the exclusive removable wiring connection block which translates into ease of use during installation process.
N1020
Temperature Controller
The N1020 temperature controller has a high performance microprocessor, which can control complex and critical processes through the self-adaptive PID control algorithm that adjusts the PID parameters and obtains the best possible response for a PID controller.
N960
Temperature Controller
Great substitute for the old and obsolete analog controllers for holding extreme simplicity in operation and yet featuring the highly accurate performance of digital technology. The 20 mm high display can be viewed from far away and the big functional keyboard can be operated by users wearing gloves.
N2000
Universal Controller
The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration of both input signal and control output through the front keyboard without any internal hardware change.
N2000S
Universal Process Controller DIN
The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.
N3000
Universal Process Controller
N3000 Big Digit Universal Process Contoller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes.
N1500-LC
Load Cell Panel Meter
The N1500-LC load cell panel meter is the ideal instrument for monitoring analogue variables in industrial processes with Load Cells.
Sensors | Transmitters
TxBlock-USB
Loop Powered, Universal Temperature Input
Head Mounted Transmitter
TEST & CALIBRATION
TEST-4
Voltage / Current simulator meter (handheld)
MSC
Multi-signal and multi-function portable smart calibrator
Special Products
S6001 PUMP CONTROLLER
IEC 61131 controller + 7″ HMI, router 4G, VPN, 31 built-in I/O channels
S6001 Pump Controller (version S6001-PC-4GWW) is a CPU for pumping systems and pressurisation units capable of handling from 2 up to 6 pumps (*), with constant flow, level and pressure regulation.