Z-KEY-P

 

Profinet IO <-> ModBUS RTU / TCP-IP gateway/protocol converter

 

Z-KEY-P is a gateway capable of transmitting data bidirectionally between Profinet IO and ModBUS RTU / ASCII / TCP-IP industrial networks. The device is equipped with 2 serial ports and 1 Ethernet 100 BaseT port and it is compatible with most common PLCs supporting the Profinet IO standard.
The Z-KEY-P autonomously reads the registers of devices on the serial bus or Ethernet ModBUS and makes them available for access by a Profinet IO controller. The ModBUS side works as a Master device capable of controlling a sub-network with 128 ModBUS RTU/ASCII slave nodes and can manage up to 500 variables (TAGs); each ModBUS TAG is convertible to Profinet IO.
Configuration and diagnostics are available via integrated web server, software suite, excel template (variable management and export), Simatic TiA Portal environment (in case of system integration with Siemens PLC), and CoDeSys PLC.

Description

TECHNICAL DATA

POWER SUPPLY 11..40 Vdc; 19..28 Vac
MAX ABSORPTION 1.5 W
ISOLATION 1.5 kVac 3-way
STATUS LED Power supply
Micro SD access
Profinet communication
Serial communication
Ethernet communication
PROTECTION DEGREE IP20
OPERATING TEMPERATURE -25°C..+65°C
CONNECTIONS 3-way removable screw terminals, 5 mm pitch
Rear IDC10 connector for DIN rail 46277
Front RJ45 connector
SMA antenna connector
Micro USB side
Micro SD card slot
MICRO SD SLOT supported card up to 32 GB
DIMENSIONS (WXHXD) 17.5 x 100 x 112 mm
WEIGHT 100 g
CASE PA6, colour black
INSTALLATION 35mm DIN rail IEC EN60715 upright
ETHERNET PORTS Nr 1 Fast Ethernet port 100 Tx, RJ45 front (Profinet IO, ModBUS TCP-IP Client)
SERIAL PORTS (COM1, COM2) Nr. 1 RS232 / RS485 switchable serial port, baud rate max 115k on connector (ModBUS RTU/ASCII Master)
Nr. 1 RS485 port, baud rate max 115k on IDC10 connector for bus and terminals (ModBUS RTU/ASCII Master)
USB PORTS Nr 1 micro USB port on side connector (ModBUS RTU Slave)
INDUSTRIAL PROTOCOLS ModBUS TCP-IP, ModBUS RTU, MdoBUS ASCII, Profinet IO
MODE OF OPERATION Profinet IO Gateway ↔ ModBUS RTU/TCP-IP/ASCII
N° MAX SERVER TCP-IP (CLIENT MODE) 10
N° MAX CLIENT VARIABLES / TAGS 500
N° MAX SLAVE MODBUS RTU/ASCII NODES 128 per serial port
PROGRAMMING DIP Switch (factory parameters, serial ports)
Web Server
EASY software suite
Excel Template
TiA Portal
CoDeSys
FIRMWARE UPDATE via Web Server
ADVANCED DIAGNOSTICS Yes
MODBUS PASS THROUGH Yes
IOT SUPPORT AND THIRD-PARTY PLATFORMS TiA Portal / Step7, GSDML
CERTIFICATIONS CE
STANDARDS EN 61000-6-2, EN61000-6-4, EN60950-1